Specifications:
The IP Camera provides both wireless IEEE 802.11 B/G and wired Ethernet network interfaces for flexible installation. It supports the WEP and WPA (Wi-Fi Protected Access) security modes to provide the best security for wireless networks. The wired network interface is the standard RJ45 Ethernet 10BaseT/100 BaseTX. The wireless modes supported are infrastructure and ad-hoc. The included antenna gain is 1.8 dBi. The camera supports the following protocols: web management Userid and Password Protection and video display ID/ Password Protection in all modes. Wireless mode supports WiFi, WEP, and WPA security mode. The hardware requirements are a Pentium 4 Cpu, 1.0 GHz or higher or AMD equivalent running Microsoft Windows XP SP2 or above and Framework 2.0, 256 MB RAM, and 35 MB of hard drive space, CDROM and 1 free port on your router. The viewing angle for the lens is 63 degrees with a light sensitivity is 1 lux. The camera is powered by the included DC 5v 1A power supply. It measures in at 4.92 inches x 2.95 inches x 1.38 inches excluding the bracket. The camera weighs 0.6 pounds (including the bracket but not the adapter). The camera includes camera, adaptor, id/password card, antenna, 5 feet of RJ45 cable, bracket, quick installation guide, manual and CD.
You can view this camera (up to 16) using any computer that has Camview software installed. The software on CD will be included with the camera however if you would like someone at a different location to be able to view the cameras and you do not want to send them the CD you can send them the link (provided after you place order).
